PE, PVC, acrylic glass or rubber: waterjet cutting enables processing that is free of internal stresses and with no thermal effect. This preserves the material properties and creates precise shapes for every application.
Free of internal stresses, no heat discoloration – surfaces remain fully intact.
Complex geometries, tight radii and a kerf width down to 0.2 mm are standard for us.
Whether transparent, elastic or high-strength – we cut all types of plastics with precision and clean edges.
How a drawing becomes a high-precision part – step by step to the finished result.
Compact geometry with small radii and defined through-holes – tolerance requirement ± 0.1 mm.
Finely tuned waterjet for elastic material, with controlled jet guidance to prevent distortion (edge quality N8).
Dimensionally accurate shapes and clean openings – ready for assembly without any post-processing.
Our technology stands for precision, quality and versatility. The following values show how precise, clean and flexible waterjet cutting is – even for the most demanding requirements.
± 0.02 mm (guaranteed ± 0.05 mm)
± 0.02 mm
± 0.005 mm
± 0.02 mm
down to 0.2 mm
0–1°
0.1 mm
2D, 2.5D and 3D cuts
up to N7 (Ra 1.6)
low burr formation, material-friendly, without thermal effect
DXF, STEP, PDF, etc.
Numerous options available
Contact us for the right solution
Standard 1–2 weeks
Faster delivery on request
Values serve as guidelines and may slightly vary depending on material, thickness, geometry and cutting strategy.
Waterjet cutting is suitable for almost all materials. Highest precision, fine contours, small radii, complex shapes, smooth cut edges and no distortion – only a waterjet can deliver all of this.
